Nigeria

Civic Centre

The building is a commercial development providing shops, meeting rooms, a large, multi-purpose hall, and a restaurant overlooking the lagoon. The site also provides a private boat club. The hall was designed without columns to make it conducive for events. As such, the fl oor slab over the hall was suspended from a large steel truss fl ying over the roof. The Lagos Civic Centre has become an iconic building in the city.

United Kingdom

Roche Pharmaceutical Product

Most especially at Dewas, India where new air conditioned Offices and Assembly Shop and naturally ventilated Warehouse were constructed to a JC&P design as an extension to the existing building. In China, we provided planning guidance for the Vane Wheel manufacturing facility at Wuxi, a joint venture with Wuxi Vane Wheel Manufacturing Co Ltd.We also have a watching brief on the Mega Site Project at Phaltan, near Pune, India.

United Kingdom

Cummins Daventry Plant

We are pleased to say we have contributed in some small way to this major capacity increase by using the cube of the assembly shop for the new NP stores and shop floor offices as well as specialist areas added, such as the new JV Test Cells, Product Development Building, Finished Goods Store and Despatch Docks, a full fire ring main and sprinkler system using Cummins engines housed in a fully glazed pump house.Located on the route taken by visitors to the facility, and new corporate branding to the office main entrance

United Kingdom

Cummins Pilot Centre

The relocated Oil Tank farm, and the provision of a new lift for the disabled in the administration building, hopefully to start some time later this year.

United Kingdom

Cummins Emission Solutions

Component Plant Building for Cummins Emissions Solutions, with additional test capacity for the Pilot Centre. The major changes within the building were due to product change, such as the complete internal remodelling of the Engine Plant in the 1980’s for the B & C series engines manufacturing processes and consolidation such as during the late 1990’s early 2000’s, or Health & Safety issues, welfare needs or support facilities such as in 2007 / 2008 bringing life back to the former Component Plant Building for Cummins Emissions Solutions

United Kingdom

Cummins Manufacturing Facility

Darlington had a very basic brief. There were to be two buildings one totally a glass box and the second a windowless box. We believe that this brief was conceived by Cummins and Kevin Roche who as our partner in this overall scheme, he being closer to the client and more known in America he got the plumb of the jobs, being the glass box.

USA

Cummins Generator Technologies

Shortly after completing the designs for Wellingborough JCP were invited to prepare a Master Plan for Newage International: Stamford which outlined the future of the existing facilitydevelopment as well as an alternative proposal for a Greenfield Site just a little further along Barnack Road.As ever, development of the existing facility was selected, and a radical change to site security and commercial vehicle routes was implemented with a new employee car park separated from the factory area by a security fence, and a new gate house for the checking in and out of all commercial lorries.

India

Tata Holset

The most recent development in India for CTT is the development of a new manufacturing facility located within a Special Economic Zone (export duty free manufacturing) at Pithampur near Indore, where the given site was on the side of a hill and where we provided advice on the most economic building location are cut and fill as well as the best adaptation of the Palmetto Building for the location.

United Kingdom

Roche Pharmaceutical Products

James Cubitt & Partners have master planned facilities both in the United Kingdom and Nigeria for Roche Pharmaceutical Products. Their Welwyn Garden City site accommodates their head office, research laboratories, manufacturing facility and automated distribution packaging centre, including employee welfare facilities. Over 1,000 employees are located on site.

United Kingdom

Cummins Ltd. – Daventry

Cummins purchased the former Herbert Ingersoll Factory in Daventry for the manufacturing high horsepower engines. JCP were invited to double the footprint of the building with a new machine shop as well as the complete internal refurbishment of the existing factory as an Assembly Shop.

United Kingdom

Chrysler-Cummins

Chrysler Motors Limited and Cummins Engine Company formed a new company called Chrysler – Cummins Limited and a factory was to set up at Darling ton, Durham. A 30 acre facility was to be engineered to produced diesel engines. The management of Chrysler-Cummins Limited appointed James Cubitt and Partners to provide all Engineering Consultancy Services and Contruction Management of the perceived factory.

Cummins Diesei-Willingborough
United Kingdom

Cummins Diesei – Willingborough

We provided a range of services for Cummins Ltd. in different locations, site development, architectural, building services, structural and Fire & Civil Engineering design engineering for both the main Building and its associated structures.