United Arab Emirates

Ben Mezar Tower

This is one of the tallest mixed use towers proposed to be in reem island at the capital city of Abu Dhabi. the project master developer is Tamouh Investment. the mixed-use residential will accomdaite 725 units, with an anticipated population of 1,595, 77 fl oors, 4 podiums with commercial units. total tower heightis 299 meters.the construction completion should be by Q1-2022.

Egypt

Pheonix Retail Park

A strip commercial and recreational area adjacent to a class A residential compound, The proposed mix use project will be situated on 49,000 meter square site consisting of a basement over the total area in addition to ground fl oor (40%) and two fl oors each over 30% of the total land area. The Project consist of 132 Offi ces and 67 Retail shops ranging from 60 m2 to 1,200 m2 on the ground fl oor and fi rst fl oor where shoppers are persuaded with the variety of entertainments, food services and exciting shopping experience.

Egypt

Palm Hills Katamya Mixed Use Development

A mixed-use development located in the eastern boundaries of new cairo, with a plot area of 46,323 m2 and a built-up area of 59,293 m2. Having 10 buildings and it off ers almost 142 retail shops ranging from 60 m2 to 1,100 m2 on the ground fl oor and fi rst fl oor where shoppers are persuaded with the variety of entertainments, food services and exciting shopping experience. Second fl oor is composed of almost 132 offi ces ranging from 60 m2 to 480 m2 while the roof is a rentable open space area.

Seven city
United Arab Emirates

Seven City – JLT DUBAI

Seven city JLT an Exclusive mixed-use development located in Jumeirah lake Towers area. Off ering a range of luxury 2700 residential units, recreational and outdoor activities, childcare facilities, educational institutions and a wide selection of retail outlets. Facilities include swimming pools, fully equipped gymnasium, access to retail amenities and underground parking. The project completion due by Q4 – 2021.

United Kingdom

Roche Pharmaceutical Product

Most especially at Dewas, India where new air conditioned Offices and Assembly Shop and naturally ventilated Warehouse were constructed to a JC&P design as an extension to the existing building. In China, we provided planning guidance for the Vane Wheel manufacturing facility at Wuxi, a joint venture with Wuxi Vane Wheel Manufacturing Co Ltd.We also have a watching brief on the Mega Site Project at Phaltan, near Pune, India.

United Kingdom

Cummins Daventry Plant

We are pleased to say we have contributed in some small way to this major capacity increase by using the cube of the assembly shop for the new NP stores and shop floor offices as well as specialist areas added, such as the new JV Test Cells, Product Development Building, Finished Goods Store and Despatch Docks, a full fire ring main and sprinkler system using Cummins engines housed in a fully glazed pump house.Located on the route taken by visitors to the facility, and new corporate branding to the office main entrance

United Kingdom

Cummins Pilot Centre

The relocated Oil Tank farm, and the provision of a new lift for the disabled in the administration building, hopefully to start some time later this year.

United Kingdom

Cummins Emission Solutions

Component Plant Building for Cummins Emissions Solutions, with additional test capacity for the Pilot Centre. The major changes within the building were due to product change, such as the complete internal remodelling of the Engine Plant in the 1980’s for the B & C series engines manufacturing processes and consolidation such as during the late 1990’s early 2000’s, or Health & Safety issues, welfare needs or support facilities such as in 2007 / 2008 bringing life back to the former Component Plant Building for Cummins Emissions Solutions

United Kingdom

Cummins Manufacturing Facility

Darlington had a very basic brief. There were to be two buildings one totally a glass box and the second a windowless box. We believe that this brief was conceived by Cummins and Kevin Roche who as our partner in this overall scheme, he being closer to the client and more known in America he got the plumb of the jobs, being the glass box.

USA

Cummins Generator Technologies

Shortly after completing the designs for Wellingborough JCP were invited to prepare a Master Plan for Newage International: Stamford which outlined the future of the existing facilitydevelopment as well as an alternative proposal for a Greenfield Site just a little further along Barnack Road.As ever, development of the existing facility was selected, and a radical change to site security and commercial vehicle routes was implemented with a new employee car park separated from the factory area by a security fence, and a new gate house for the checking in and out of all commercial lorries.

India

Tata Holset

The most recent development in India for CTT is the development of a new manufacturing facility located within a Special Economic Zone (export duty free manufacturing) at Pithampur near Indore, where the given site was on the side of a hill and where we provided advice on the most economic building location are cut and fill as well as the best adaptation of the Palmetto Building for the location.

United Kingdom

Roche Pharmaceutical Products

James Cubitt & Partners have master planned facilities both in the United Kingdom and Nigeria for Roche Pharmaceutical Products. Their Welwyn Garden City site accommodates their head office, research laboratories, manufacturing facility and automated distribution packaging centre, including employee welfare facilities. Over 1,000 employees are located on site.

United Kingdom

Cummins Power Generator

James Cubitt & Partners were invited to prepare the master planning design and outline specification for this new facility. Again, great care was taken in the building design to introduce as much natural light in to the offices and warehouse / workshop areas by the introduction of a large internal landscaped courtyard which is used during the summer months by employees during their break periods.

Turkey

Cummins Generator Technologies

In 2010 Cummins Inc. selected a Duty Free Industrial Site in Izmir, Turkey for a major factory development for Cummins Filtration and Cummins Generator Technologies. The 10 Hectare site was Master Planned by James Cubitt & Partners to be developed in 4 phases.

United Kingdom

Cummins Ltd. – Daventry

Cummins purchased the former Herbert Ingersoll Factory in Daventry for the manufacturing high horsepower engines. JCP were invited to double the footprint of the building with a new machine shop as well as the complete internal refurbishment of the existing factory as an Assembly Shop.

United Kingdom

Chrysler-Cummins

Chrysler Motors Limited and Cummins Engine Company formed a new company called Chrysler – Cummins Limited and a factory was to set up at Darling ton, Durham. A 30 acre facility was to be engineered to produced diesel engines. The management of Chrysler-Cummins Limited appointed James Cubitt and Partners to provide all Engineering Consultancy Services and Contruction Management of the perceived factory.

Sheraton Four Point
Nigeria

Sheraton Four Point

JCP is commissioned to produce an architectural design for a hotel tower which include building facilities such as rooms, restaurants and parking area, etc. The brilliant interior design should reflect its ingenuity and perceive the impression of the Client and tenants. Building services provided will undergo series of quality test to ensure requirements meet the international standards and local regulations.

Nigeria

Hotel Project

James Cubitt and Partners was commissioned to do a complete Architectural design for modern hotel. The hotel is aesthetically modern and offering amenities of a 4 star calibre. The hotel is a business hotel intended for travelling businessmen and short stay travellers.

Nigeria

Sofitel

Sofitel is a luxury hotel chain and JCP is appointed to design architectural and project supervision of the building construction. Sofitel a skyscraping luxury 5-star hotel with luxurious facilities and executed services in an internationally recognized high building standards. JCP to provide full review and inspections of the Engineering activities in line with approved Client’s specifications and satisfaction.

Nigeria

AIC Hilton Hotel

AIC limited is a major private company that provided multi-sectoral business and one of it is thru Hospitality. AIC partnered with the famous Hotel name brand Hilton to build the AIC Hilton in Nigeria. AIC tapped James ubitt and Partners to render Architectural Design for the said project.

Nigeria

Mosefejo Close, Private House

Architectural and interior design is JCP’s approached in building Mosefejo Close, Private House. The structure contains are elevated in a space of height, this space gets natural light through transparent glass doors and openings. The interior design reflects the calmness of the surroundings. The structure is made up of mixed timber woods and concrete. .

Nigeria

Chanrai Penthouse Apartments

Penthouses also differentiate themselves by luxurious amenities such as high-end appliances, finest materials fitting, luxurious flooring system, and more. JCP is commissioned to undertake the architectural design and the construction services and to meet the guests or tenants expectations as well as the applied advanced technology & process that will benefit the entire operation.

Nigeria

Dipcharima Close , 12 Apartments

Dipcharima Close, 12 Apartments Project main goals is to promote sustainable urban housing, by assuring the design of the apartments can offers and gives suitable accommodation for a variety of household types and sizes.

Nigeria

CAPL Town Houses

The CAPL Town Houses is located in Ikoyi, Lagos, Nigeria. JCP rendered Architectural Services with CAPL to Design and Supervise a 6 Units town houses in 1985. The Design of the town houses is a conservative to modern one, using concrete and paint to make the facade decent for presentation, it was catered to target mid-class level housing.

No more posts to show